GAM 10 ANGULAR WINDOW WORKING CENTRE | |
| |
Electronic programmer with 6" colour video: | |
- Possibility to enter single programs, complete | |
working cycles | |
- Automatic calculation of the entered quantities USB | |
| |
Technical data: TENONING UNIT | |
| |
- Sliding table stroke | 2000 mm. |
- Useful height of programmed units | 320 mm. |
- Useful stroke of spindle moulder axis | 280 mm. |
- Spindle moulder axis diam. | 50 mm. |
- Max. diam. of programmed tools | 320 mm. |
- Saw blade diam. | 400 mm. |
- Max. cut height | 120 mm. |
- Horizontal movement of saw blade | 100 mm. |
- Motor power: | |
saw axis | 4 hp (3 kw) |
spindle moulder axis | 10 hp (7,5 kw) |
- Suction dust hoods diam.: | |
saw axis | 120 mm. |
spindle moulder axis | 150 mm. |
| |
Technical data: PROFILING UNIT | |
| |
- Height of the 1st counter-supported profiling | |
spindle moulder axis | 320 mm. |
- Useful height of programmed units | 320 mm. |
- Useful stroke of spindle moulder axis | 280 mm. |
- Spindle moulder axis diam. | 50 mm. |
- Max. diam. of programmed tools | 220 mm. |
- Motor power: spindle moulder axis | 7,5 hp (5,5 kw) |
- Suction dust hoods dia.: | |
spindle moulder axis | 150 mm. |
| |
Technical data: BATTEN MAKER DEVICE | |
| |
- Blade dia. | 200 mm. |
- Spindle dia. | 35 mm. |
- Spindle useful length | 20 mm. |
- Spindle rotation speed | 6000 r.p.m. |
- Pneumatic vertical positioning programmable from | |
computer through manual turret with 4 positions | |
- Manual horizontal positioning | |
- Suction dust hood dia. | 80 mm. |
- Motor power | 3 hp (2,2 kw) |
- Net weight | 3000 kg. |
| |
| |